TOWERS&MASTS
|
Triangular guyed
towers SR5 type
In Italiano:
Scheda tecnica traliccio SR5
Listino prezzi |
|
SALIENT
CHARACTERISTICS:
Ourtower-structures are wholly
of steel, modular
and hot-galvanized.Bolted construction is used
throughout the tower for a couple of good reasons.
Mainly this gives the owner the choice of having
the tower shipped unassembled (knocked-down) in
kit form, and also offers the ability to replace
tower components in the field with just a wrench,
should a structural member ever become damaged.
Shipping in kit form can also save a bit on
freight costs to the delivery point.Tower sections
are connected together with 24 bolts per connection,
using steel splice plates on both the outside and
inside of each leg intersection, forming an
extremely strong and positive joint.
Some radio-antennas, fixed or rotative, can be
placed at the structure top by special supports.
In case of rotative antennas, special supports can
be inserted in the inside of the last module to
fasten rotators of our productionand all the others
present on the market. Furthermore the mast can be
locked by a thrust-holder bearing support and guided
by supports having nylon bushings. |
| TECHNICAL
CHARACTERISTICS:
|
GE/SR5
model |
| TYPE |
triangular bolted section |
| MODULE
HEIGHT m (ft) |
2
(6.6) |
| SECTION |
TRIANGULAR |
| SIDE
cm (in) |
50
(19.7) |
| MODULE
WEIGHT kg (lbs) |
36
(79.4) |
| NUMBER
OF M12X30 JUNCTION BOLTS |
24 |
| CM2
RESISTING MOMENT |
77 |
| AVAILABLE
MOMENT kgm (highest module) |
350 |
| MAXIMUM
VERTICAL THRUST kg (lbs) (highest module) |
450
(992) |
| MAXIMUM
TRACTION ON guy rope kg (lbs) |
450
(992) |
| CM2
DIAGONALS |
6.70 |
| CM2
VERTICAL angulars |
10.62 |
| DISTANCE
OF GUY-ROPE m (ft) |
6 (*4)
- 19.7 (*13.2) |
| DISPOSITION
OF GUY-ROPE |
120° |
| INCLINATION
OF GUY-ROPE |
60° |
| WEIGHT
OF BASEMENT kg (lbs) |
3,000
(6,614) |
|
(*) = VERY WINDY
AREAS |
|
|
Triangular bolted section SR5 |
|
 |
Tower legs |
 |
 |
|
|
This shot clearly details a typical section joint in
our towers. Steel plates are used on both the outside and inside of each
joint, offering maximum strength. |
|
Click
on the image to enlarge it.
| MOD. |
TAPERED MASTS mm |
| M1 |
Ø 48 X 3000 |
| M2 |
Ø 60 X 3000 |
| M3 |
Ø 48 + Ø 40 X 5650 |
| M4 |
Ø 60 + Ø 48 X 5650 |
| M5 |
Ø 76 + Ø 60 X 5650 |
| M6 |
Ø 76 + Ø 60 + Ø 48 X 8300 |
| M7 |
Ø 90 + Ø 76 X 5650 |
| M8 |
Ø 90 + Ø 76 + Ø 60 X 8300 |
| M9 |
CONSTRUCTION TO MEASURE |
| MR1 |
Ø 48 REDUCTION ON ROTOR SIDE |
|
|
TRIANGULAR TOWER & ACCESSORIES: |
| Mod. |
TYPE |
|
GE/SR5 |
TRIANGULAR MUDULE 2 meters ( 6.6 ft ) |
|
BCSR5 |
BASE FOR CONCRETE |
|
BTSR5 |
TERRACE
BASE |
|
BCTSR5 |
TRANSPORTABLE BASE |
|
SMSR5 |
WALL
BRACKET |
|
SCSR5 |
TOWER
BRACKET FOR FIXING GUY ROPE |
|
PAI/SR5 |
GIN POLE |
|
FRSR5/100 |
ROTATOR PLATE
( Central hole 100,5 mm ) |
|
FRSR5/S |
ROTATOR PLATE
( without central hole ) |
|
FBSR5/60 |
PLATE WITH 60 mm BUSHING |
|
FBSR5/S |
PLATE WITH
BUSHING on request |
|
FCSR5/60 |
60 mm THRUST BEARING PLATE |
|
FCSR5/S |
THRUST BEARING PLATE
on request |
|
SMT |
GUY
ANCHOR FOR CONCRETE |
|
SMF |
GUY
ANCHOR FOR WALL OR TERRACE |
|
|
--------------------------
SR5 Triangular guyed
towers with carriage. |
| The antennas and the rotator are fixed on the
carriage at about 1.5 m from ground, roof or terrace in all quietness,
comfort and work safety. When the operations are over, the carriage with
antennas assembled is lifted up to the tower top with a system of
sheaves and manual winch. It is clear that, for any type of maintenance,
repair or tests, you need only to activate the winch in order to take
the carriage with antennas and rotator to the tower base,to intervene
where necessary and to lift again the whole. |
| MODEL |
HEIGHT m |
TOWER TYPE |
| TC6/SR5/M |
6 |
GE/SR5 |
| TC8/SR5/M |
8 |
GE/SR5 |
| TC10/SR5/M |
10 |
GE/SR5 |
| TC12/SR5/M |
12 |
GE/SR5 |
| TC14/SR5/M |
14 |
GE/SR5 |
| TC16/SR5/M |
16 |
GE/SR5 |
| TC18/SR5/M |
18 |
GE/SR5 |
| TC20/SR5/M |
20 |
GE/SR5 |
|
|
|
 |
|
Click
on the image to enlarge it. |
|
 |
|
Mod. 8AFL &
12AFL |
|
 |
|
Mod. 25N3F |
|
 |
|
Mod. VE/600 |
|
|
MOD.
|
ACCESSORIES |
|
BCSR5 |
BASE FOR CONCRETE |
|
BTSR5 |
TERRACE BASE
|
|
BCTSR5 |
TRANSPORTABLE BASE
|
|
SMSR5 |
WALL BRACKET |
|
SCSR5 |
TOWER BRACKET FOR
FIXING GUY ROPE |
|
PAI/SR5 |
GIN POLE |
|
FRTC/100 |
ROTATOR PLATE (
Central hole 100,5 mm ) |
|
FRTC/S |
ROTATOR PLATE (
without central hole ) |
|
FBTC/60 |
PLATE WITH 60 mm BUSHING |
|
FBTC/S |
PLATE WITH BUSHING
on request |
|
FCTC/60 |
60 mm THRUST BEARING PLATE |
|
FCTC/S |
THRUST BEARING PLATE
on request |
|
12AF |
MANUAL WINCH , CAPACITY:
490 kg |
|
30AF |
MANUAL WINCH , CAPACITY
: 1419 kg , 3 speeds |
|
VE/600 |
230 v ELECTRICAL
WINCH, CAPACITY: 600 kG |
|
VE/600/EP |
ELECTRIC PANEL FOR
VE/600 |
|
TCKIT |
CARRIAGE FOR GE/SR5 |
|
SMT |
GUY ANCHOR FOR CONCRETE |
|
SMF |
GUY ANCHOR FOR WALL OR TERRACE |
|
Our cubical quad antennas, quad HF, loops
antennas,HF antennas,Yagi antenna,Beams,beam antenna,Dipole,Dipoles,wire
antenna,wires antennas,HF dipoles,radiation patterns,Arrays,Array,T2FD,D2T,terminating
antenna,continuous tuning antennas,continuous coverage antenna,quad antenna,cubical
quad antenna,Quad,Quads,log-periodic antenna,rotators,antenna rotators,broad-band
antenna,mast,masts,Masts,antenna mast,Towers,antenna towers,self-supporting
towers,guyed towers,towers for antennas,guy rope,isolating cables,HAM,ham,ham
radio,CB,military antenna systems,military,broadband,multi mission,navy,tank,Coast
Guard,ship,radio,communications,tactical,Tactical antennas,Fiberglass masts,fiberglass,composite,army,broad
band,HF,LF,VHF,OM,VLF,HLPA,RLPA
